|
|
TM 5-2410-237-23
TRACK IDLER REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Materials/Parts - Continued
Tools and Special Tools
Lockwasher (3, 13 and 17)
Tool kit, general mechanic's (Item 122, WP 0250
References
Shop equipment, general purpose repair (Item 106,
TM 5-2410-237-10
Personnel Required
Sling, nylon (Item 109, WP 0250 00)
Two
Lifting equipment, 1,000 lb capacity
Equipment Condition
Materials/Parts
Track separated (WP 0143 00)
Compound, antiseize (Item 6, WP 0249 00)
REMOVAL
1.
Remove two capscrews (1), washers (2), lockwashers (3) and guard (4) from both sides of idler (5). Discard lockwash-
ers.
NOTE
Keep shims with respective plates for installation.
2.
Remove four capscrews (6), washers (7), two spacers (8), shims (9), strip (10) and plate (11) from both sides of idler (5).
3.
Remove two capscrews (12) and lockwashers (13) from bearing (14) and yoke (15) on both sides of idler (5). Discard
lockwashers.
5
9
5
4
10
1,2,3
8
15
6,7
12,13
11
387-605
387-606
14
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |