 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
TRANSMISSION ASSEMBLY SERVICE - CONTINUED
0107 00
SERVICE - CONTINUED
NOTE
Use a suitable container to capture draining oil. Dispose of oil IAW local policy and ordinances. Ensure all
spills are cleaned up.
2.
Remove bevel gear drain plug (4) and steering clutch
drain plugs (5) and allow transmission to drain.
3.
Remove breather (1) and clean.
387-392
5
5
4
4.
Install breather (1) and tighten.
5.
Drain transmission oil cooler (WP 0109 00).
6.
Remove plug from flywheel housing and drain oil (WP 0106 00).
7.
Replace transmission and steering clutch oil filter
3
assembly (WP 0111 00).
1
8.
Remove, clean and reinstall transmission oil magnetic
screen assembly (WP 0112 00).
9.
Remove, clean and reinstall torque divider suction
screen (WP 0115 00).
10.
Install bevel gear drain plug (4) and steering clutch
2
drain plugs (5).
NOTE
on temperature range of operation
expected.
11.
Fill transmission with oil through fill tube (2).
387-391
12.
Install fill tube cap (3).
13.
Start engine and allow to warm up.
14.
Check for transmission oil leaks.
15.
Remove dipstick and check level. Oil should be at FULL mark on dipstick. Add oil as needed. Shut down engine.
16.
Install crankcase guard (WP 0157 00).
END OF WORK PACKAGE
0107 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals