 |
|||
|
|
|||
|
Page Title:
VALVE MECHANISM COVER REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 5-2410-327-23
VALVE MECHANISM COVER REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
Materials/Parts - Continued
Gasket (5)
Tool kit, general mechanic's (Item 122, WP 0250
Lockwasher (3)
Shop equipment, common no. 1 (Item 103, WP
Equipment Condition
Hood removed (WP 0159 00)
Materials/Parts
Ether starting aid removed (WP 0061 00)
Compound, antiseize (Item 6, WP 0249 00)
Air cleaner removed (WP 0046 00)
Crankcase breather removed (WP 0015 00)
Compound, gasket shellac (Item 8, WP 0249 00)
REMOVAL
WARNING
Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa) nozzle pressure when
drying parts with compressed air. Use a maximum of 30 psi (207 kPa) when cleaning components. DO NOT
direct compressed air against human skin. Failure to follow this warning may result in serious injury or
death. Make sure air stream is directed away from user and other personnel in the area. To prevent injury,
user must wear protective goggles or face shield.
1.
Use pressurized air to clean any loose particles from
5
1
valve cover (1) before removal of cover.
2.
Remove three capscrews (2), lockwashers (3) and
clamps (4) securing wiring harness (5). Move wiring
harness out of the way of valve cover (1). Discard
lockwashers.
3.
Remove 12 capscrews (2), lockwashers (3) and
2
clamps (4) that secure valve cover (1).
3
4
387-118
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals