 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-327-23
VALVE MECHANISM COVER REPLACEMENT - CONTINUED
0017 00
REMOVAL - CONTINUED
4.
Remove valve cover (1) from cylinder head (6). Remove gasket (7) from valve cover and discard gasket.
INSTALLATION
1.
Make sure that gasket surfaces are clean.
2.
Apply gasket compound on face of valve cover (1) and install new gasket (5) in valve cover.
3.
Install valve cover (1) onto cylinder head (4).
4.
Position wiring harness (5) and install three clamps (4), new lockwashers (3) and capscrews (2) to secure wiring harness
on valve cover (1). Do not tighten.
5.
Install 12 clamps (4), new lockwashers (3) and capscrews (2) to secure valve cover (1). Tighten capscrews in number
sequence shown to 96 lb-in. (11 Nm).
1
7
387-120
387-119
6
6.
Install crankcase breather (WP 0015 00).
7.
Install air cleaner (WP 0046 00).
8.
Install ether starting aid (WP 0061 00).
9.
Start engine and inspect mating surface of valve cover for oil leaks. Turn off engine.
10.
Install hood (WP 0159 00).
5
1
2
3
387-118
4
END OF WORK PACKAGE
0017 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals