|
|
TM 5-2410-237-23
TROUBLESHOOTING PROCEDURES - CONTINUED
0006 00
Table 6. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
14. Engine Cranks But Will Not Start in Cold
c. Set
to
(Ω)
Weather (Fuel Available) - Continued.
appropriate ohm
range.
d. Connect meter positive
lead to one end of wire.
e. Connect meter negative
1. If continuity is indicated,
lead to other end of wire.
replace temperature switch.
2. If continuity is not indicated,
repair open circuit in wire
5.
Test starting aid system
voltage.
a. Disconnect starting aid
switch-to-valve lead at
starting aid valve.
b. Set
to
appropriate voltage range.
TO STARTING
AID SWITCH
STARTING
AID VALVE
387-899
0006 00-64
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |