|
|
TM 5-2410-237-23
TROUBLESHOOTING PROCEDURES - CONTINUED
0006 00
Table 6. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
14. Engine Cranks But Will Not Start in Cold
c. Connect a jumper wire
Weather (Fuel Available) - Continued.
between purple wire on
valve and chassis ground.
STARTING AID VALVE
TEMPERATURE
SWITCH
JUMPER WIRE
387-898
1. If valve functions, go to Table
d. Crank engine, press
6, Malfunction 14, Test 4.
starting aid button and
listen for starting aid valve
operation.
2. If valve does not function,
place battery disconnect
switch in OFF position and
reconnect temperature switch
lead to starting aid valve. Go
to Table 6, Malfunction 14,
Test 5.
4.
Test temperature switch
wire for continuity.
a. Place battery disconnect
switch in OFF position.
b. Disconnect wire between
temperature switch and
starting aid valve at both
ends.
0006 00-63
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |