RIPPER LIFT CYLINDER REPAIR - TM-5-2410-233-230791

TM 5-2410-233-23

RIPPER LIFT CYLINDER REPAIR

0164 00

THIS WORK PACKAGE COVERS

Disassembly, Cleaning and Inspection, Assembly

INITIAL SETUP

Tools and Special Tools

Materials/Parts - Continued

Tool kit, general mechanic's (Item 112, WP 0185

Gasket (22)

Nut, self-locking (17)

Shop equipment, general purpose repair (Item 97,

O-ring (10 and 23)

Packing, preformed (21)

Guide, seal (Item 26, WP 0185 00)

Ring (26)

Inserter, seal (Item 36, WP 0185 00)

Ring, backup (24)

Materials/Parts

Ring, piston (27)

Cap set, protective (Item 2, WP 0184 00)

Seal (20 and 25)

Cleaning compound, solvent (Item 4, WP 0184 00)

Personnel Required

Cloth, abrasive, emery (Item 5, WP 0184 00)

Two

Oil, lubricating (Item 22, 23 or 24, WP 0184 00)

Rag, wiping (Item 28, WP 0184 00)

Equipment Condition

Ripper lift cylinder removed (WP 0163 00)

Sealant, quick-cure (Item 29, WP 0184 00

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-

cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of

heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death.

CAUTION

Wipe area clean around all hydraulic connections to be opened during disassembly. Install protective caps

and plugs as needed. Contamination of hydraulic system could result in premature failure.

NOTE

Use a suitable container to catch any hydraulic oil that may drain from cylinder. Dispose of oil

IAW local policy and ordinances. Ensure all spills are cleaned up.

Ripper lift cylinder weighs 206 lb (94 kg).

0164 00-1