 |
|||
|
|
|||
|
Page Title:
RIPPER LIFT CYLINDER REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 5-2410-233-23
RIPPER LIFT CYLINDER REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Materials/Parts - Continued
Applicable Configuration
Oil, lubricating (Item 22, 23 or 24, WP 0184 00)
Tractor with ripper
Rag, wiping (Item 28, WP 0184 00)
Tools and Special Tools
Tag marker (Item 35, WP 0184 00)
Tool kit, general mechanic's (Item 112, WP 0185
O-ring (4)
Shop equipment, common no. 1 (Item 94, WP 0185
References
Sling, nylon (Item 100, WP 0185 00)
Personnel Required
Lifting equipment, 1,000 lb capacity
Three
Wood blocks (2) 4 in. x 8 in. x 4 ft.
Equipment Condition
Materials/Parts
Machine parked on level ground (TM 5-2410-233-
Cap set, protective (Item 2, WP 0184 00)
10)
Hydraulic system pressure relieved (WP 0176 00)
Grease, GAA (Item 15, WP 0184 00)
WARNING
Do NOT remove hydraulic tank filler cap or disconnect or remove any hydraulic system line or fitting
unless hydraulic system pressure has been relieved. Hydraulic system pressure can be over 2500 psi (17,237
kPa), even with engine and pump OFF. To relieve pressure, lower all hydraulic attachments to the ground
and shut down engine. Move control levers through all operating positions, then SLOWLY loosen hydraulic
tank filler cap. After maintenance, tighten all connections before applying pressure. Escaping hydraulic oil
under pressure can penetrate the skin, causing serious injury or death.
CAUTION
Wipe area clean around all hydraulic connections to be opened during removal. Cap lines and plug open-
ings after removing hydraulic lines. Contamination of hydraulic system could result in premature failure.
NOTE
Tag all hydraulic lines to ensure correct installation.
Use a suitable container to capture any oil leakage. Dispose of oil IAW local policy and ordi-
nances. Ensure all spills are cleaned up.
This procedure replaces right ripper lift cylinder. Procedure for the left ripper lift cylinder is
the same.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals