 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
SEAT, SEAT BELT AND SEAT BASE ASSEMBLY REPLACEMENT - CONTINUED
0137 00
REMOVAL - CONTINUED
NOTE
Perform steps 4 through 16 only if seat base is to be removed.
4.
Remove floor plates (WP 0135 00).
5.
Disconnect battery cables (WP 0080 00).
6.
Remove transmission selector knob, guard and guide cover (WP 0084 00).
7.
Remove brake lock lever and linkage (WP 0124 00).
8.
Remove winch controls, if equipped (WP 0142 00).
9.
Remove four capscrews (6), lockwashers (7) and two
6
7
8
armrest assemblies (8) from seat base assembly (5).
Discard lockwashers.
5
386-768
10.
Remove battery disconnect switch (WP 0076 00).
11.
Pull battery cables free of seat base.
12.
Disconnect transmission linkages and remove selector lever and bracket support from seat base assembly (5) (WP 0083
13.
Remove two nuts (9), eye bolts (10) and each seat belt (11) from seat base assembly (5).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Seat base assembly weighs 85 lb (39 kg).
14.
Attach nylon slings and a suitable lifting device to seat base assembly (5).
15.
Remove six bolts (12), lockwashers (13) and washers (14) from seat base assembly (5). Discard lockwashers.
16.
Lift seat base assembly (5) from tractor. Remove nylon slings and lifting device from seat base assembly.
0137 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals