 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
TRACK ADJUSTER CYLINDER REPLACEMENT - CONTINUED
0117 00
INSTALLATION - CONTINUED
NOTE
Lubricate new seal with a thin coating of clean oil prior to installation.
4.
Install ring (11) on piston (7) and position new seal (10) with chamber toward cylinder (6) seated flush with ring.
5.
Install piston (7) as an assembly in cylinder (6).
6.
Install new seal (8) and gasket (9) in front pilot of recoil spring. Apply clean grease on seal.
7.
Install piston (7) as an assembly into cylinder (6).
8.
Install hydraulic track adjuster assembly in position in front pilot of recoil spring.
9.
Move front idler and recoil rod (4) toward hydraulic
5
track adjuster. Ensure hydraulic track adjuster is
1,2,3
against yoke.
NOTE
Apply antiseize compound to bolts before
installation.
10.
Install five bolts (3), new lockwashers (2), and nuts (1)
that hold hydraulic track adjuster to yoke (4).
4
386-237
11.
Connect track (WP 0119 00).
12.
Install track roller frame guards (WP 0111 00).
13.
Test drive and check track for proper operation (TM 5-2410-233-10).
END OF WORK PACKAGE
0117 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals