TRACK CARRIER ROLLERS REPLACEMENT - TM-5-2410-233-230541

TM 5-2410-233-23

TRACK CARRIER ROLLERS REPLACEMENT

0114 00

THIS WORK PACKAGE COVERS

Removal, Installation

INITIAL SETUP

References

Tools and Special Tools

TM 5-2410-233-10

Tool kit, general mechanics (Item 112, WP 0185

Shop equipment, general purpose repair (Item 97,

Personnel Required

WP 0185 00)

Two

Sling, nylon (Item 100, WP 0185 00)

Lifting equipment, 200 lb capacity

Equipment Condition

Track loosened (WP 0119 00)

Materials/Parts

Compound, antiseize (Item 6, WP 0184 00)

Lockwasher (4 and 7)

Block, wood (4 in. x 4 in. x 12 in.)

REMOVAL

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-

cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of

heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.

NOTE

Carrier roller assembly weighs 120 lb (55 kg).

Place a block and hydraulic jack under track, near car-

rier roller (1) and lift track up and away from carrier

roller.

Fasten a nylon sling and a lifting device to carrier

roller (1) and bracket (2).

386-524