 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
TRACK CARRIER ROLLERS REPLACEMENT - CONTINUED
0114 00
REMOVAL - CONTINUED
3.
Remove four capscrews (3) and lockwashers (4) that secure bracket (2) to track roller frame (5). Discard lockwashers.
4.
Remove carrier roller (1) and bracket (2) as a unit from track roller frame (5).
NOTE
Secure bracket in vise to permit removal of capscrews.
5.
Remove two capscrews (6) and lockwashers (7). Discard lockwashers.
6.
Separate bracket (2) from carrier roller (1).
1
1
6
7
2
386-524
2
3,4 5
386-525
INSTALLATION
NOTE
Secure bracket in vise to permit installation of carrier roller to bracket.
Apply antiseize compound to all capscrews before installation.
1.
Install carrier roller (1) on bracket (2).
2.
Install two new lockwashers (7) and capscrews (6).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Carrier roller assembly weighs 120 lb (55 kg).
1.
Fasten a nylon sling and a suitable lifting device and position carrier roller (1) and bracket (2) as a unit on track roller
frame (5).
0114 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals