 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
CYLINDER HEAD ASSEMBLY AND SPACER PLATE REPLACEMENT - CONTINUED
0023 00
INSTALLATION - CONTINUED
NOTE
If engine cylinder head lifting brackets were used, lifting brackets remain on cylinder head.
9.
Install front and rear engine lifting bracket, if removed.
NOTE
Apply clean oil to threads of cylinder head capscrews.
10.
Install 20 capscrews (17), washers (18) and six capscrews (16).
11.
Tighten capscrews (16 and 17) in the following sequence:
a.
Tighten all capscrews in number sequence to 115 lb-ft (156 Nm).
b.
Retighten all capscrews in number sequence to 175 lb-ft (237 Nm).
c.
Verify all capscrews in number sequence to 175 lb-ft (237 Nm).
d.
Tighten all capscrews in letter sequence to 22 lb-ft (30 Nm).
e.
Retighten all capscrews in letter sequence to 32 lb-ft (43 Nm).
f.
Verify all capscrews in letter sequence to 32 lb-ft (43 Nm).
12
13
11
386-000
386-182
CYLINDER
HEAD
12.
Install valve mechanism.
13.
Adjust valves (WP 0017 00).
14.
Install valve mechanism cover (WP 0016 00).
0023 00-7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals