 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
CYLINDER HEAD ASSEMBLY AND SPACER PLATE REPLACEMENT - CONTINUED
0023 00
INSTALLATION - CONTINUED
4.
Position new cylinder head gasket (21) on cylinder
21
block (20).
20
386-184
5.
Install lifting links with 5/8 -11x 1-1/2 in. bolts or use lifting bracket at front and rear of cylinder head (19).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Cylinder head weighs approximately 200 lb (91
kg).
6.
Attach a nylon sling and suitable lifting equipment to
lifting points at front and rear of cylinder head (19).
7.
Carefully lift cylinder head and place in correct posi-
tion on cylinder block (20).
8.
Remove lifting device, lifting links and bolts.
19
20
386-183
0023 00-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals