VALVE MECHANISM COVER REPLACEMENT - TM-5-2410-233-230149

TM 5-2410-233-23

VALVE MECHANISM COVER REPLACEMENT

0016 00

THIS WORK PACKAGE COVERS

Removal, Installation

INITIAL SETUP

Materials/Parts - Continued

Tools and Special Tools

Lockwasher (3)

Tool kit, general mechanic's (Item 112, WP 0185 00)

Shop equipment, common no. 1 (Item 94, WP 0185

Equipment Condition

00)

Hood removed (WP 0136 00)

Materials/Parts

Ether starting aid removed (WP 0057 00)

Compound, gasket shellac (Item 8, WP 0184 00)

Air cleaner removed (WP 0043 00)

Crankcase breather removed (WP 0014 00)

Gasket (7)

REMOVAL

WARNING

Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa) nozzle pressure when

drying parts with compressed air. Use a maximum of 30 psi (207 kPa) when cleaning components. DO NOT

direct compressed air against human skin. Failure to follow this warning may cause injury or death. Make

sure air stream is directed away from user and other personnel in the area. To prevent injury, user must

wear protective goggles or face shield.

Use pressurized air to clean any loose particles from valve cover (1) before removal of cover.

Remove three capscrews (2), lockwashers (3) and

clamps (4) securing wiring harness (5). Move wiring

harness out of the way of valve cover (1).

Remove 12 capscrews (2), lockwashers (3) and

clamps (4) that secure valve cover (1). Discard lock-

washers.

386-158