 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
REAR ENGINE MOUNTS REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Personnel Required
Tools and Special Tools
Tool kit, general mechanic's (Item 112, WP 0185 00)
Two
Shop equipment, general purpose repair (Item 97, WP
Equipment Condition
Engine assembly removed (WP 0019 00)
Materials/Parts
Lockwasher (2)
REMOVAL
1.
Remove two capscrews (1) and lockwashers (2) from
each rear engine mount (3). Discard lockwashers.
2.
Remove rear engine mounts (3).
NOTE
Prior to removal of shims, mark position of
21
shim on frame to ensure correct placement at
installation.
3.
Remove shims (4) from frame. Note quantity and
measure thickness of removed shims.
INSTALLATION
NOTE
Place shims on frame in same position from
3
which they were removed. If new shims are
4
required, replace with shims of the same thick-
ness as previously removed shims.
1.
Position rear engine mounts (3) on flywheel housing.
2.
Install two capscrews (1) and new lockwashers (2) to
386-019
each rear engine mount (3). Tighten capscrews to 150
lb-ft (203 Nm).
3.
Install engine assembly (WP 0019 00).
END OF WORK PACKAGE
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals