 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
FRONT ENGINE SUPPORT REPLACEMENT - CONTINUED
0020 00
INSTALLATION
1.
Install engine front support (1) in position on trunnion (9) and secure with four washers (8) and capscrews (7). Tighten
capscrews to 75 lb-ft (102 Nm).
2.
Lift engine slightly, remove jack stands and wood cribbing from under oil pan and flywheel housing.
NOTE
Prior to setting front of engine on frame, ensure front support and frame holes are aligned.
3.
Lower front of engine until front support (1) is resting on frame.
4.
Install two capscrews (6), washers (5) and nuts (4) on engine front support (1). Tighten capscrews to 150 lb-ft (203 Nm).
5.
Tighten three capscrews (2) to 150 lb-ft (203 Nm) securing engine rear supports (3) to frame.
6.
Install crankshaft pulley (WP 0026 00).
7.
Run engine and check for proper operation and leaks (TM 5-2410-233-10).
8.
If removed, install crankcase guard (WP 0129 00).
END OF WORK PACKAGE
0020 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals