 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
FRONT ENGINE SUPPORT REPLACEMENT - CONTINUED
0020 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Weight of engine assembly is approximately 3,000 lb (1,362 kg).
3.
Position lifting equipment to only lift front of engine.
CAUTION
Do NOT remove engine rear support mounting capscrews.
4.
Loosen three capscrews (2) attaching engine rear supports (3) at each side of flywheel housing.
5.
Raise front of engine enough to take weight of engine off front support (1). Reposition jack stands.
6.
Remove two nuts (4), washers (5) and capscrews (6) from engine front support (1).
7.
Check to ensure front jack stands are firmly positioned against oil pan.
8.
Remove four capscrews (7) and washers (8) attaching engine front support (1) to trunnion (9).
9.
Turn engine front support (1) to the right (as seen from front of engine) and remove from engine.
1
7,8
3
6
2
4,5
386-052
WOOD
386-180
9
CRIBBING
(HIDDEN)
0020 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals