ADJUSTING VALVE CLEARANCE - TM-5-2410-233-230158

TM 5-2410-233-23

VALVE MECHANISM ADJUSTMENT- CONTINUED

0017 00

ADJUSTING VALVE CLEARANCE - CONTINUED

NOTE

Set all valves that need adjustment to 0.025 in. (0.64 mm) for exhaust and to 0.015 in. (0.38 mm) for intake

in the following manner.

With engine set with number 1 piston at TDC on compression stroke, make adjustments for valve clearance on intake

valves for cylinders 1, 2 and 4. Make an adjustment to valve clearance on exhaust valves for cylinders 1, 3 and 5.

Remove bolt (25) from flywheel housing and turn flywheel 360 degrees to the right. This will put number 6 piston at

TDC on compression stroke. Install bolt back into flywheel housing.

Make an adjustment to valve clearance on intake valves for cylinders 3, 5 and 6. Make an adjustment to valve clearance

on exhaust valves for cylinders 2, 4 and 6.

CAUTION

Bolt will damage flywheel housing and flywheel if not removed and replaced by plug.

Remove bolt (25) and install plug (23) in flywheel

FLYWHEEL

TRANSMISSION

housing.

HOUSING

OIL COOLER

Install valve mechanism cover (WP 0016 00).

Install crankcase guard (WP 0129 00).

FRONT OF

MACHINE

386-161

END OF WORK PACKAGE

0017 00-8