 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
VALVE MECHANISM COVER REPLACEMENT - CONTINUED
0016 00
REMOVAL - CONTINUED
4.
Remove valve cover (1) from cylinder head (6). Remove gasket (7) from valve cover and discard gasket.
INSTALLATION
1.
Make sure that gasket surfaces are clean.
2.
Apply gasket compound to face of valve cover (1) and install new gasket (7) to valve cover.
3.
Install valve cover (1) onto cylinder head (6).
4.
Position wiring harness (5) and install three clamps (4), new lockwashers (3) and capscrews (2) to secure wiring harness
to valve cover (1). Do not tighten capscrews.
1
7
386-160
386-159
6
5.
Install 12 clamps (4), new lockwashers (3) and cap-
1
screws (2) to secure valve cover (1). Tighten cap-
screws in number sequence shown to 96 lb-in. (11
Nm).
2
3
6.
Install crankcase breather (WP 0014 00).
386-158
4
7.
Install air cleaner (WP 0043 00).
5
8.
Install ether starting aid (WP 0057 00).
.
Start engine and inspect mating surface of valve cover for oil leaks (TM 5-2410-233-10). Turn off engine.
9.
10.
Install hood (WP 0136 00).
END OF WORK PACKAGE
0016 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals