|
|
TM 5-2410-233-23
TROUBLESHOOTING PROCEDURES - CONTINUED
0006 00
Table 6. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
c. Disconnect orange wire
13. Lamp(s) Will Not Light - Continued.
from light switch terminal
B.
d. Set
to
appropriate voltage range.
e. Connect meter positive
lead
to
disconnected
orange wire and negative
lead to chassis ground.
ORANGE WIRE
EXTERIOR
LIGHT SWITCH
386-501
f. Place battery disconnect 1. If voltage is indicated, go to
Table 6, Malfunction 13, Test
switch in ON position and
observe meter reading.
2. If voltage is not indicated,
replace broken wire(s) to
switch and/or light switch. fuse
0006 00-49
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |