|
|
TM 5-2410-233-23
TROUBLESHOOTING PROCEDURES - CONTINUED
0006 00
Table 6. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
c. Connect multimeter positive
5.
Starting Motor Inoperative - Continued.
lead to terminal where
orange lead connects (switch
side) and negative lead to
terminal where white lead
connects (switch side).
d. Turn start switch fully to 1. If continuity is indicated,
the right.
repair open circuit between
engine start switch and starter
relay (WP 0177 00).
2. If continuity is not indicated,
replace engine start switch
386-491
Solenoid and Starting Motor Operate; 1. Check
batteries
for
6.
overheating.
Engine Cranks Slowly
a. Crank engine
for
15
seconds.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |