Click here to make tpub.com your Home Page

Page Title: Table 1. Troubleshooting Procedures
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 5-2410-233-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0010 00
Table 1. Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4. Engine Overheats.
1. With engine shut down and
Remove
obstructions,
dirt,
cool,  check  radiator  for
leaves, etc.
obstructions, dirt, leaves, etc.
2. Check fan belt for wear and
Notify Unit Maintenance for
tension.
replacement or adjustment.
WARNING
DO NOT remove cooling system radiator cap when engine
is hot. Allow engine to cool down. Loosen cap to first stop
and let any pressure out of cooling system, then remove cap.
Failure to follow this warning may cause burns.
Allow engine to cool, then  Add coolant as needed (WP 0011
3.
remove radiator fill cap and  00 and WP 0012 00, Item 41).
check coolant level (WP 0012
00, Item 4).
4.
Check level of engine oil (WP  Fill crankcase with proper grade
0012 00, Item 5).
of oil to FULL mark on dipstick
Item 5).
Check operation of governor  1. If control lever does not
5. Engine Runs Erratically and Vibrates.
1.
control lever by moving it back
operate linkage, notify Unit
and forth.
Maintenance.
2. If control lever and linkage are
OK, go to Step 2.
2.
Check for clogged fuel filter  Notify Unit Maintenance for
by observing fuel pressure  filter servicing if gage needle is in
RED zone.
gage reading.
6. Low Engine Power.
1.
Ensure fuel shutoff valve is all  Turn fuel shutoff valve all the
the way ON.
way ON.
2.
Check air cleaner service  If red band is showing, service air
cleaner
primary
element.
indicator reading.
Remember to reset air cleaner
service indicator (WP 0014 00).
3.
Check for clogged fuel filter  Notify Unit Maintenance for
by observing fuel pressure  filter servicing if gage needle is in
gage reading.
RED zone.
4.
Check operation of governor  1. If control lever does not
control lever.
operate linkage, notify Unit
Maintenance.
2. If control lever and linkage is
OK, go to Step 5.
5.
Check exhaust for excessive  Notify Unit Maintenance for
smoke.
turbocharger inspection.

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business