OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)

TM 5-2410-233-10

OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)

0012 00

PMCS INITIAL SETUP

Materials/Parts - Continued

Tools and Test Equipment

Oil, lubricating, OE/HDO-30 (Item 11, WP 0019

Basic issue items (WP 0017 00)

00)

Materials/Parts

Rags (Item 12, WP 0019 00)

Antifreeze (Item 1, WP 0019 00)

Personnel Required

Driver/operator

Detergent (Item 3, WP 0019 00)

Equipment Condition

Grease, GAA (Item 7, WP 0019 00)

Tractor parked on level ground (WP 0005 00, Page

Oil, lubricating, OE/HDO-10 (Item 9, WP 0019 00)

0005 00-14)

Oil, lubricating, OE/HDO-15/40 (Item 10, WP

Engine OFF (WP 0005 00, Page 0005 00-14)

0019 00)

Blade lowered to ground (WP 0005 00, Page 0005

00-14)

Oil, lubricating, OEA-30 (Item 8, WP 0019 00)

Table 1. Operator Preventive Maintenance Checks and Services (PMCS) for D7F Tractor.

LOCATION

ITEM TO

ITEM

MAN-

CHECK/

NOT FULLY MISSION

NO.

INTERVAL

HOURS

SERVICE

PROCEDURE

CAPABLE IF:

NOTE

Review all WARNINGs, CAUTIONs and NOTEs before

performing Operator PMCS on the D7F Tractor.

Perform all weekly and before operation PMCS checks if:

a. You are the assigned operator but have not operated the

tractor since the last weekly checks.

b. You are operating the tractor for the first time.

Unless otherwise indicated, perform all lubrication and

preventive maintenance with tractor parked on level ground,

transmission in N (Neutral) with transmission lock lever in

locked position, brake lock lever engaged, implements lowered

to the ground and engine shut down.

After one week of initial operation of a SLEP D7F Tractor,

notify Unit Maintenance to replace transmission, bevel gear

and steering clutch oil filter element and clean magnetic

strainer.

After one month of initial operation of a SLEP D7F Tractor,

notify Unit Maintenance to check level of oil in final drives.

0012 00-1