Modification Procedures. (Cont) - MWO-5-2410-236-20-10006

MWO 5-2410-236-20-1

10. Modification Procedures - (Continued).

WARNING

Exercise extreme caution while seating ferrule.

Failure to securely seat cable in ferrule could cause death or serious injury.

6. Refer to Figure 3.

7. Seat wedge into ferrule (1) by completely unwinding all cable from drum and applying a load to the cable

(2).

8. Check to ensure that wedge is properly seated. If cable and wedge still extends beyond the end of ferrule,

repeat Step 7 to fully seat.

9. Rewind cable (2) onto drum (3), maintaining tension and guiding turns as close to preceding turn as

possible.

Figure 3.

10. Place winchline tail chain hook (1) through pintle (2) to secure when not in use. (Figure 4).

Figure 4.