Modification Procedures. (cont) - MWO-5-2410-236-20-10007

MWO 5-2410-236-20-1

10. Modification Procedures - (Continued).

WARNING

When operating the winch under any load, leave at least 3 wraps of winch cable on the drum

at all times. The hardware which attaches the cable could break resulting in death or serious injury.

11. Calibration Requirements. Not applicable.

12. Weight and balance data. Not applicable.

13. Quality assurance requirements. The wire rope assembly provided in the modification kit has been tested

to assure proper fit and reliability when ii-stalled on the D5BS, D5BNS, D5BS1 and D5BNS1 in accordance with

the instructions specified in this MWO.

14. Recording and reporting of the modification.

a. RECORDS AND REPORTS. Recording and reporting procedures will be documented on DA Forms 2407,

2408-5, 2408-9, 2409, and DA Form 5504 will be sent to: U.S. Army Tank-automotive and Armaments Command,

Warren, Michigan, 48397-5000, ATTN: AMSTA-IM-MMBC.

b. MARKlNG EQUIPMENT. Record MWO number in log book in accordance with DA Pam 738-750.

c. IDENTIFlCATlON DATA. Not applicable.

15. Material Change (MC) number. This MWO is authorized by MC number 1-95-06-4493.

16. Modification Identification. D5B Series Tractor, Wire Rope Assembly Modification. Refer to TM 5-2410-236-

24P for details on original configuration.

The new wire rope assembly consists of 142 feet of one inch wire rope. A ferrule IS installed on one

end with a wedge. A seven link winch line tall chain is secured to the other end with five wire rope clamps.

By Order of the Secretary of the Army:

DENNIS J. REIMER

General, United States Army

Chief of Staff

Official:

Administrative Assistant to the

Secretary of the Army

01145

DISTRIUBTION:

To be distributed in accordance with DA Form 12-25-E, block 2312, requirements for

MWO 5-2410-236-20-1.

*U.S. GOVERNMENT PRINTING OFFICE: 1996 746-014/20127