Click here to make tpub.com your Home Page

Page Title: FAULT CODE 050 OR 052: TOO MANY NO START ATTEMPTS OR NO START SAFETY TIME EXCEEDED. (Cont)
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 9-2320-364-34-1
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical circuits, a direct short
may result. Damage to equipment, injury or death to personnel may occur.
NOTE
Arctic heater flame sensor resistance is between 900 ohms at 13_F (-25_C) and 1100 ohms at 77_F (25_C).
(1) Ensure arctic heater temperature is
between -13_ and 77_F (- 25_
-
and 25_C).
(2) Disconnect arctic heater unit harness
connector from arctic heater control
unit (TM 9-2320-364-20).
(3) Remove three screws and arctic heater
control unit (Para 18-2.2).
(4) Connect positive (+) lead to gray wire
at arctic heater internal harness
connector, terminal 15.
(5) Connect negative (-) lead to gray wire
at arctic heater internal harness
connector, terminal 16.
(6) Is resistance across arctic heater
flame sensor between 900 and
1100 ohms at room temperature?
(a) If resistance reading is not between
900 and 1100 ohms at room
temperature, replace arctic heater
flame sensor (Para 18-2.2).
(b) If resistance reading is between
900 and 1100 ohms at room
temperature, replace arctic heater
glow pin (Para 18-2.2).
2-82559
2-

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business