CRANE FAILS LOAD TEST. (Cont) -726250773

TM 9-2320-364-34-1

Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive

electrical circuits a direct short may result. Damage to equipment, injury or death to personnel may

result.

CONTINUITY TEST

(1) Disconnect top harness connector

from OSS box.

(2) Loosen six screws and remove six

clips from crane main junction box

cover.

(3) Remove cover from junction box.

(4) Set multimeter to ohms scale.

(5) Check continuity between harness

connector, terminal B and junction

box, terminal 18.

(a) If no continuity is present,

repair harness (Para 6-29).

(b) If continuity is present, perform

Step (6) below and replace OSS

box (Para 6-8).

(6) Install cover on junction box with

six screws and clips.