LOW OIL LEVEL SENSOR CIRCUIT FAULTY. (Cont) -726250199

TM 9-2320-364-34-1

Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical

circuits, a direct short may result. Damage to equipment, injury or death to personnel may occur.

CONTINUITY TEST

(1) Set multimeter select switch to ohms.

(2) Disconnect sensor harness assembly

from low oil level sensor.

(3) Is there continuity between oil

level sensor terminals?

(a) If there is continuity, low oil

level sensor is OK. Go to

Step 2 of this Fault.

(b) If there is no continuity, replace

low oil level sensor (Para 7-5).