|
|
TM 9-2320-364-20-1
2-14. DDEC III/IV TROUBLESHOOTING (CONT).
Section IV. TROUBLESHOOTING CHARTS (Cont.)
C. START - FIRST CHART FOR DIAGNOSIS OF DDEC III/IV USING DDR
STEP/SEQUENCE
RESULT
WHAT TO DO NEXT
START-1
Note "Check
Engine/Check
Gauges" Light
Turn ignition on while at the same
Light or lights
Go to START-2.
time observing the "Check Engine/
comes on and stays on.
Check Gauges" lights (engine not
running).
Lights come
Go to START-3.
on for up to 5 seconds,
then goes out.
Lights are off.
Go to Chart 4, page 2-579.
Erratic or
Go to START-7.
intermittent light.
START-2
Read Active
Codes Using DDR
Plug DDR into the
Active codes
Follow appropriate diagnostic
DDL connector.
(other than "NO CODES")
charts for code(s) received.
on DDR.
(See Table 2-19).
Read active codes by selecting the
DIAGNOSTIC CODE MENU
(ACTIVE CODES) on the DDR.
No active code.
Go to Chart 5, page 2-585.
DDR display reads
Go to START-6.
"NO DATA
RECEIVED FROM
SYSTEM" or "DDEC
SYSTEM NOT
RESPONDING".
DDR display is
Go to START-9.
blank or random.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |