|
|
TM 9-2320-364-20-1
NOTE
Battery voltage surges, while cranking the
engine, may blank out or reset DDR.
DDR TEST
(1) Connect DDR to DDL connector
MC13.
(2) Turn ON ENGINE switch
(TM 9-2320-364-10).
(3) Select MODE 04 (ENGINE RPM) on
DDR (Para 2-11).
(4) Turn engine switch to start and
observe DDR display.
(a) If engine RPM is more than 0, turn
OFF ENGINE switch and go to
Step 5 of this Fault.
(b) If engine RPM remains at 0, TRS
is not adjusted correctly. Turn
OFF ENGINE switch and notify
DS Maintenance.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |