|
|
TM 9-2320-364-20-1
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical circuits, a
direct short may result. Damage to equipment, injury or death to personnel may occur.
CONTINUITY TEST
(1) Remove emergency shut-off switch
from side cover (Para 7-27).
(2) Disconnect emergency shut-off switch
from switch connector.
(3) Set multimeter select switch to ohms.
(4) Is there continuity between terminals 5
and 7 at emergency shut-off switch?
(a) If there is no continuity, replace
emergency shut-off switch
(Para 7-27).
(b) If there is continuity, emergency
shut-off switch is OK.
(5) Connect emergency shut-off switch to
switch connector.
(6) Install emergency shut-off switch in
side cover.
2-481
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |