CODE 11 VERNIER CONTROL SIGNAL VOLTAGE LOW (CONT). -726280258

TM 9-2320-364-20-1

A4 CODE 11 VERNIER CONTROL SIGNAL VOLTAGE LOW (CONT).

11.

KNOWN INFO

TEST OPTIONS

WARNING

READ WARNING

CHECK ENGINE light (CEL)

Resistance test.

on Page 2-189

comes ON and stays ON.

STE/ICE-R #92.

Code 11 only code displayed on

DDR.

REASON FOR QUESTION

Are there more than 10,000

Vehicle harness connector

MC18 OK.

Resistance less than or equal to

ohms or an open circuit in

DDEC ECM OK.

10,000 ohms at vehicle harness

battery positive wire 240/241?

Wires 916 and 952 not shorted.

connector or 6-way power

Wire 916 OK.

connector indicates short.

Wires 1525 and 952 not

shorted.

Wires 1525 and 916 not

shorted.

Repair wires 240

Vernier control terminals OK.

and/or 241 (see

Vernier control OK.

schematic Fig 2-3)

or notify DS

POSSIBLE PROBLEMS

Maintenance.

Verify repair, go to

Wires 240 and/or 241 shorted.

Step 12 of this Fault.

Wire 150 faulty.

Wire 240 faulty.

YES

Fault not corrected.

Notify DS

Maintenance.

2-188