Creating a custom list

TM 9-2320-364-20-1

SELECT DATA LIST

DESIRED

(STANDARD)

CUSTOM

Data Readout Window

(d)

Use the LEFT and RIGHT arrows to toggle to your choice and press ENTER. Refer to Steps 1 and

2 for STANDARD instructions; or Step (e) for creating a custom list.

If you choose STANDARD, one of two things happens. If there was no custom list already in

memory, you will be returned to the menu. If a custom list is still in DDR memory, you will

see:

RESET CUSTOM LIST

ARE YOU SURE?

YES

[NO]

Data Readout Window

This display gives you the choice of continuing to use the existing custom list (choose NO) or

creating a new custom list (choose YES). If you choose NO, you will return to the menu. If

you choose YES, refer to Step (e) below. Press ENTER to confirm your choice.

(e)

Creating a custom list. You are now ready to actually create a new custom list. The available

diagnostic parameter list is displayed on the bottom line, one item at a time. Use the UP and

DOWN arrow keys to scroll the list.

SELECT PARAMETER

PRESS ENTER

Current line = 2

RANGE SEL/ATT

Data Readout Window

Line 4 now automatically indexes to the next item in the data list. Notice that the number on

line 3 indicates that you are ready to select the parameter you want to place on the second line

of your custom list. Use the UP and DOWN arrow keys to locate RANGE SEL/ATT in the list

on line 4 and press ENTER. SEL/ATT in the list on line 4 and press ENTER. RANGE

SEL/ATT is now entered on the second line of your customized list. Continue this process

until you have located and entered each item you want on your customized list.

Press FUNC to exit. You can now use your customized list to read data. It is also available in

Snapshot.

2-113