Click here to make tpub.com your Home Page

Page Title: Table 2-12. DDEC II System Code Index (CONT).
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 9-2320-364-20-1
Table 2-12. DDEC II System Code Index (CONT).
Code
Effected
Number
Sensor
Description
41
Timing Reference (TRS)
The number TRS pulses received per revolution was
incorrect or completely missing. One pulse per cylinder per
revolution is required.
42
Synchronous Reference (SRS)
Did not receive an SRS pulse on every firing of the #1 cylinder.
44
HIGH OIL TEMPERATURE - System running for 2 seconds
with the oil temperature greater than a calibrated limit.
45
LOW OIL PRESSURE - Engine running with the oil pressure
less than the limit (different limits at different RPM's) for 7
seconds.
46
LOW BATTERY VOLTAGE - Engine running with low
battery voltage (less than 10 volts) for more than 30 seconds.
51
EEPROM ERROR - An error has been detected in the
EEPROM (Electrically Erasable, Programmable, Read Only
Memory) inside the DDEC ECM.
52
ECM FAILURE - The DDEC ECM was unable to correctly
convert sensor voltages into numbers for computer usage.
53
EEPROM ERROR - An error has been detected in the
EEPROM inside the DDEC ECM which affects the logging
of trouble codes.
56
ECM FAILURE - The DDEC ECM was unable to correctly
convert sensor voltages into numbers for computer usage.
61 thru 68
RESPONSE TIME TOO LONG - The response time of the
injector was longer than the maximum limit or the injector
never responded at all. Oil temperature must be greater
than 30 degrees C and battery voltage must be between 11
volts and 16 volts to log this code. The code is only logged
at less than 2000 RPM.
71 thru 78
RESPONSE TIME TOO SHORT - The response time of the
injector was shorter than the minimum limit. Oil
temperature must be greater than 30 degrees C and battery
voltage must be between 11 volts and 16 volts to log this
code. The code is only logged at less than 2000 RPM.
(b)
When the reader powers up, observe the data readout window. It will remain on for several
seconds. If the reader does not power up, check connections and be sure the ENGINE switch is
ON.
MPSI PRO - LINK 9000
SOFTWARE COPYRIGHT
1989-91 VERSION 3.0
DDEC I AND DDEC II
Data Readout Window
2-101

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business