Table 2-1. Unit Level Preventive Maintenance Checks and Services (PMCS) (CONT). -726280081

TM 9-2320-364-20-1

Table 2-1. Unit Level Preventive Maintenance Checks and Services (PMCS) (CONT).

Interval

Item to Be

Procedure

Not Mission

Item

Inspected

Capable If:

No.

Semi-

Steering

a. Check shaft and gearbox for missing parts,

a. Intergear link is

Annual

Shaft and

bent parts, or misalignment. Replace missing

broken, cracked or mis-

2.21:1

or bent parts. Adjust misaligned parts. Refer

aligned.

Steering

to Para 14-9.

NOTE

If an air-operated grease gun does not purge

the fitting, use a hand-operated grease gun.

If the part does not purge, remove fitting

and clean, install fitting and grease again. If

part still does not purge, refer to

maintenance task for that component.

When using a grease gun, apply lubricant to

the fitting until clean lubricant squeezes out

of the part being lubricated.

When greasing steering shaft slip joint lube

fitting, apply two pumps from a manual

grease gun or two clicks from a pneumatic

grease gun. If rubber boot appears to be full

of grease, remove tie strap from end of

rubber boot. Push boot forward and wipe

off excess grease from boot and steering

shaft. Position rubber boot correctly on

steering shaft and install new tie strap.

2-17