|
|
TM 9-2320-364-20-1
Table 2-1. Unit Level Preventive Maintenance Checks and Services (PMCS) (CONT).
Interval
Item to Be
Procedure
Not Mission
Item
Inspected
Capable If:
No.
AFTER ROAD TEST
a. Ensure the vehicle has been cleaned of
a. The vehicle is ex-
mud, gravel, etc., from the underbody outside
cessively dirty or cov-
and crew compartment area.
ered with mud.
Do not hold steering wheel at full left or right
position for longer than 10 seconds. Oil
overheating and pump damage can result.
b. With vehicle stopped, turn steering wheel
b. Hard steering is evi-
to extreme left, then to extreme right to check
dent.
for hard steering.
c. Check engine operation at all speeds.
c. Engine governed
Ensure that engine does not go over engine
speed - no load is below
governed speed - no load (2175-2275 rpm).
2175 rpms or exceeds
2275.
LEFT FRONT SIDE
OF TRUCK
2
Semi-
DUVAC
Check wiring for fraying, splits and loose
Wiring is frayed or split
Annual
connections. Tighten loose connections.
or any loose connections.
Repair if wiring is frayed or split. Refer to
Para 7-101.
3
Semi-
Electric
Check electric slave receptacle terminals (1)
Annual
Slave
for damage. Replace terminals if damaged.
Receptacle
Refer to Para 7-101. Coat terminals with
electrical sealant (Item 68, Appendix C).
2-11
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |