REPAIR PARTS; SPECIAL TOOLS; TEST, MEASUREMENT AND DIAGNOSTIC EQUIPMENT (TMDE); AND SUPPORT EQUIPMENT

TM 9-2320-364-20-1

Section I. REPAIR PARTS; SPECIAL TOOLS; TEST, MEASUREMENT AND

DIAGNOSTIC EQUIPMENT (TMDE); AND SUPPORT EQUIPMENT

2-1. COMMON TOOLS AND EQUIPMENT.

For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE)

applicable to your unit.

2-2. SPECIAL TOOLS, TMDE AND SUPPORT EQUIPMENT.

For a listing of special tools, TMDE and support equipment, refer to the Maintenance Allocation Chart (MAC),

Appendix B, of this manual and to the Repair Parts and Special Tools List (RPSTL), TM 9-2320-364-24P.

2-3. REPAIR PARTS.

Repair parts are listed and illustrated in the Repair Parts and Special Tools List (TM 9-2320-364-24P) covering Unit

Maintenance for this equipment.

Section II. SERVICE UPON RECEIPT

2-4. UNPACKING AND DEPROCESSING.

a. Unpacking. Upon receipt of a new truck, the receiving organization must see if it has been properly

prepared for service and is in good condition. Inspect all assemblies, subassemblies and accessories to be sure

they are in proper working order (TM 9-2320-364-10). Secure, clean and correctly adjust and/or lubricate as

needed (Para 2-9 and TM 9-2320-364-10). Check all tools and equipment to be sure every item is accounted for

(TM 9-2320-364-10-HR), in good condition, clean and properly mounted or stowed (TM 9-2320-364-10).

b. Deprocessing. Read "Processing and Deprocessing Record of Shipping, Storage and Issue of Trucks

and Spare Engines" tag, (DD Form 1397), and follow all precautions checked. This tag should be attached to the

steering wheel, shifting lever or ENGINE START switch.

2-5. HAND RECEIPT MANUAL AND INVENTORY OF EQUIPMENT.

When a new truck is first received by the using organization, it is necessary to inventory the truck equipment. For

detailed procedures, refer to Hand Receipt Manual, TM 9-2320-364-10-HR.

2-6. SERVICE BEFORE OPERATION.

General.

(1)

Refer to TM 9-2320-364-10 for operating instructions for the truck.

2-2