ADJUSTMENT (Cont) -699581023

TM9-2320-363-20-2

10. WITH CAB DOOR (8) FULLY CLOSED, CHECK IN-OUT POSITION OF BOTTOM OF CAB DOOR (8)

AND FLANGE (10) AT HINGE (11). CAB DOOR (8) MUST BE FLUSH 1/16 IN. (1.58 mm).

NOTE

Perform steps 11 and 12 only if required.

11. TO ADJUST BOTTOM OF CAB DOOR (8), LOOSEN ADJUSTING SCREW (3) AND MOVE CAB

DOOR (8) IN OR OUT TO REQUIRED MEASUREMENT. TIGHTEN ADJUSTING SCREW (3).

12. REPEAT STEPS 10 AND 11 UNTIL BOTTOM OF CAB DOOR (8) IS PROPERLY ADJUSTED.

13. INSTALL SIX NEW LOCK BOLTS (1) AND TIGHTEN SIX LOCK BOLTS (1) AND TWO ADJUSTING

SCREWS (2 AND 3) IN ORDER SHOWN TO 120 LB-IN. (1360 N.cm).

4-749