ADJUSTMENT (Cont) -699581024

TM9-2320-363-20-2

C A B DOOR ADJUSTMENT (CONT)

14. CLOSE CAB DOOR (8) TO WITHIN 2 IN. OF STRIKER PIN (12) AND LOOK TO SEE IF DOOR

LATCH JAWS (13) WILL BE CENTERD ON STRIKER PIN (12).

15.

LOOSEN TORX SCREW (14) AND ADD OR REMOVE SHIMS (15) AS NECESSARY TO CENTER

STRIKER PIN (12) AND DOOR LATCH JAWS (13).

NOTE

Steps 16 thru 19 must be performed from inside and outside of cab.

Repeat step 16 until door closes fully without difficulty.

16. FULLY CLOSE CAB DOOR (8). IF CAB DOOR (8) WAS DIFFICULT TO CLOSE OR WOULD NOT

CLOSE, OPEN CAB DOOR, LOOSEN TORX SCREW (14), AND MOVE STRIKER PIN (12) INWARD.

4-750