ADJUSTMENT (Cont) -699581022

TM9-2320-363-20-2

CAB DOOR ADJUSTMENT (CONT)

NOTE

Perform steps 5 and 6 only if required.

TO ADJUST CAB DOOR (8), LOOSEN TWO ADJUSTING SCREWS (2 AND 3) JUST ENOUGH TO

ALLOW MOVEMENT OF CAB DOOR (8) UP OR DOWN TO REQUIRED MEASUREMENT. TIGHTEN

TWO ADJUSTING SCREWS (2 AND 3).

REPEAT STEPS 4 AND 5 UNTIL CAB DOOR (8) IS PROPERLY ADJUSTED.

NOTE

C a b door is fully closed when you hear two clicks of door latch, and should not

have to be slammed shut. If it is necessary to slam cab door shut, door must be

adjusted.

WITH CAB DOOR (8) FULLY CLOSED, CHECK IN-OUT POSITION OF TOP OF CAB DOOR (8) AND

FLANGE (10) AT HINGE (11). CAB DOOR (8) MUST BE FLUSH 1/16 IN. (1.58 mm).

NOTE

Perform steps 8 and 9 only if required.

TO ADJUST TOP OF CAB DOOR (8), LOOSEN ADJUSTING SCREW (2) AND MOVE CAB DOOR (8)

IN OR OUT TO REQUIRED MEASUREMENT. TIGHTEN ADJUSTING SCREW (2).

REPEAT STEPS 7 AND 8 UNTIL TOP OF CAB DOOR (8) IS PROPERLY ADJUSTED.

4-748