CTIS SPEED SENSOR REPLACEMENT

TM 9-2320-363-20-2

CTIS SPEED SENSOR REPLACEMENT

This task covers:

a. Removal

b. Cleaning/Inspection

c. Installation

INITIAL SETUP

Applicable Configuration:

Materials/Parts:

M917A1 and M917A1 w/MCS

Compound, Pipe Sealing

Tools and Special Equipment:

Equipment Condition:

Tool Kit, SC 5180-90-CL-N26

Reference

Condition Description

Page 2-29

Batteries Disconnected

REMOVAL

NOTE

Remove tie wraps as required. Replace with new tie wraps on installation.

DISCONNECT TWO SPEED SENSOR CONNECTORS (1) FROM TWO WIRING HARNESS CONNECTORS (2).

NOTE

Note seating depth of speed sensor to ensure correct installation.

REMOVE SPEED SENSOR (3) FROM TRANSFER CASE COVER PLATE (4).

CLEANING/INSPECTION

Clean and inspect all parts in accordance with Chapter 2.

INSTALLATION

NOTE

Apply a thin coat of thread sealing compound on male threads of fittings.

Ensure that seating depth of speed sensor is the same as noted during

removal.

INSTALL SPEED SENSOR (3) ON TRANSFER CASE COVER PLATE (4).

CONNECT TWO WIRING HARNESS CONNECTORS (2) TO TW O SPEED SENSOR CONNECTORS (1).

4-604.12 Change 3