 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
REAR BRAKESHOE AND LINING REPLACEMENT (CONT)
2.
PRY UPPER BRAKESHOE (4) AWAY FROM S-CAM (5).
3.
REMOVE TWO CAM ROLLERS (6) BETWEEN BRAKESHOES (4 AND 7) AND S-CAM (5 ).
4.
REMOVE BRAKE SPRING (8) AND TWO SPRING RETAINING CLIPS (9).
5.
REMOVE TWO RETAINING RINGS (10), TWO SEAL CUPS (11), AND TWO FELT SEALS (12). DISCARD FELT
SEALS.
6.
PIVOT BRAKESHOES (4 AND 7) OVER FOR ACCESS TO TWO LOCK SCREWS (13).
7.
REMOVE LOCKWIRE (14) AND BACK OUT TWO LOCK SCREWS (13) UNTIL TWO ANCHOR PINS (15) ARE
FREE. DISCARD LOCKWIRE.
8.
REMOVE TWO ANCHOR PINS (15) FROM BRAKESHOES (4 AND 7).
9.
REMOVE BRAKESHOES (4 AND 7).
CLEANING
Clean all parts in accordance with Chapter 2.
INSPECTION
1.
BRAKE LINING THICKNESS MUST BE NO LESS THAN 1/4 IN.
2.
THERE MUST BE NO LESS THAN 1/32-IN. CLEARANCE BETWEEN TOP OF BRAKE LINING AND TOP OF ALL
RIVET HEADS.
3.
INSPECT ALL REMAINING PARTS IN ACCORDANCE WITH CHAPTER 2.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals