 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
INSTALLATION
1.
APPLY THIN FILM OF ANTISEIZE COMPOUND TO TWO ANCHOR PINS (15) AND TO SMALL
DIAMETER OF TWO CAM ROLLERS (6).
2.
ALINE MOUNTING LUGS ON EACH BRAKESHOE (4 AND 7) OVER BRAKE SPIDER (3) AND
INSTALL TWO ANCHOR PINS (15) SO THAT LOCKING GROOVES FACE UP.
3.
INSTALL TWO NEW FELT SEALS (12) AND TWO SEAL CUPS (11) OVER TWO ANCHOR PINS
(15).
INSTALL TWO RETAINING RINGS (10).
4.
5.
TIGHTEN TWO LOCK SCREWS (13) UNTIL BOTTOMED IN GROOVES OF TWO ANCHOR PINS
(15).
INSTALL NEW LOCKWIRE (14).
6.
7.
INSTALL TWO SPRING RETAINING CLIPS (9) ON TWO BRAKESHOES (4 AND 7).
HOLD LOWER BRAKESHOE (7) IN PLACE AND INSTALL BRAKE SPRING (8) BETWEEN TWO
8.
SPRING RETAINING CLIPS (9).
INSTALL TWO CAM ROLLERS (6) BETWEEN BRAKESHOES (4 AND 7) AND S-CAM (5).
9.
10. INSTALL 2-PIECE DUST SHIELD (2) ON BRAKE SPIDER (3) WITH SIX CAPSCREWS (1).
NOTE
Follow-on Maintenance:
Install rear hub, drum, wheel bearings, and seal (page 4-594).
4-419
Change 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals