 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
FRONT AXLE TOE-IN ALINEMENT
This task covers:
a. Alinement Check
b. Adjustment
INITIAL SETUP
Applicable Configuration:
Materials/Parts:
M915A2
Spray Paint/Chalk
Appe ndix C, Item 23
Tools and Special Equipment:
Personnel Required: (2)
Shop Equipment, SC 4910-95-CL-A72
Tool Kit, SC 5180-90-CL-N26
ALINEMENT CHECK
1.
BLOCK REAR WHEELS AND RAISE FRONT END OF VEHICLE SO FRONT TIRES CAN BE ROTATED.
SUPPORT VEHICLE ON JACK STANDS.
2.
SLOWLY ROTATE TIRE AND WHITEN CENTER OF TIRE AROUND COMPLETE CIRCUMFERENCE USING
SPRAY PAINT OR CHALK. REPEAT FOR OPPOSITE FRONT TIRE.
3.
ROTATE TIRE AND SCRIBE A LINE (1) AROUND COMPLETE CIRCUMFERENCE NEAR CENTER SO THAT
LINE IS VISIBLE IN WHITENED AREA. REPEAT FOR OPPOSITE FRONT TIRE.
4.
LOWER VEHICLE FROM JACK STANDS.
5.
REMOVE CHOCKS. BACK UP VEHICLE A FEW FEET, THEN DRIVE FORWARD APPROXIMATELY 10 FEET.
6.
PLACE TRANSMISSION IN NEUTRAL AND SET PARKING BRAKE.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals