TRANSMISSION OIL COOLER REPLACEMENT -699580520

TM 9-2320-363-20-2

TRANSMISSION OIL COOLER REPLACEMENT

This task covers: a. Removal b. Disassembly

c. Cleaning/Inspection

d. Assembly

e. Installation

INITIAL SETUP

Tools and Special Equipment:

General Safety Instructions:

Shop Equipment, SC 4910-95-CL-A72

Tool Kit, SC 5180-90-CL-N26

WARNING

Spilled transmission fluid is

Materials/Parts:

very slippery. Wipe up any

Nut, Lock (4)

spilled fluid immediately.

Failure to do so could result in

Equipment Condition:

serious injury to personnel.

Reference

Condition Description

Page 4-356

Transmission Oil Cooler

Lines and Fittings

Removed.

REMOVAL

WARNING

Spilled transmission fluid is very slippery. Wipe up any spilled fluid immediately.

Failure to do so could result in serious injury to personnel.

REMOVE LOCK NUT (1), WASHER (2), SCREW (3), AND WASHER (4) AND SET OIL SAMPLE VALVE (5)

ASIDE. DISCARD LOCK NUT.

REMOVE THREE LOCK NUTS (6), THREE WASHERS (7), THREE SCREWS (8), THREE WASHERS (9), AND

TRANSMISSION OIL COOLER (10). DISCARD LOCK NUTS.

DISASSEMBLY

REMOVE THREE NUTS (11), THREE WASHERS (12), THREE CAPSCREWS (13), THREE WASHERS (14), AND

FOUR BRACKETS (15).

CLEANING/INSPECTION

Clean and inspect all parts in accordance with Chapter 2.