UPPER RIGHT DASH PANEL REPLACEMENT -699580270

TM 9-2320-363-20-2

UPPER RIGHT DASH PANEL REPLACEMENT

This task covers:

a. Removal

b. Cleaning/Inspection

c. Installation

INITIAL SETUP

Applicable Configuration:

Materials/Parts:

All except M915A2 and M916A1

Compound, Pipe

Appendix C, Item 8

Sealing

Tools and Special Equipment:

Tags, Identification Appendix C, Item 26

Shop Equipment, SC 4910-95-CL-A72

Tool Kit, SC 5180-90-CL-N26

General Safety Instructions:

Equipment Condition:

WARNING

Reference

Condition Description

Make sure all air lines and fittings are

clear of

debris. Make sure excess pipe sealing

Page 2-28

Air System Drained

compound does not enter air lines and fittings.

Failure to do so could result in equipment

Page 2-29

Batteries Disconnected

failure and/or injury to personnel.

Page 4-568

Parking Brake and Trailer

Air Supply Valves

Removed

REMOVAL

NOTE

Tag all air tubes and electrical connectors prior to removal to aid in installation

DISCONNECT CONNECTOR (1) FROM LIGHT SWITCH (2).

REMOVE FOUR NUTS (3), SCREWS (4), AND LIGHT SWITCH (2) FROM PANEL (5).

AS REQUIRED, REMOVE THREE SCREWS (6), KNOBS (7), AND WASHERS (8) FROM LIGHT SWITCH (2).

DISCONNECT TWO CONNECTORS (9) FROM SWITCHES (10).

REMOVE THREE FIBER OPTIC LABELS (11).

REMOVE THREE LABEL HOLDERS (12), TWO NUTS (13), AND TWO SWITCHES (10) FROM PANEL (5).

NOTE

There are two control valves and associated hardware on upper right dash panel;

tailgate release control valve (M917A1 and M917A1 w/MCS) (top) and all-wheel

drive control valve (bottom). One is illustrated.

DISCONNECT TWO TUBES (14) AND CONNECTOR (15).

4-185.0 Change 3