 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
WATER PUMP REPLACEMENT
This task covers:
a. Removal
b. Cleaning/Inspection
c. Installation
INITIAL SETUP
Tools and Special Equipment:
Equipment Condition:
Shop Equipment, SC 4910-95-CL-A72
Reference
Condition Description
Tool Kit, SC 5180-90-CL-N26
Slip/Lash Tester, P/N J35687
Cooling System Drained
Bolt, 5/16-18 (2)
Oil Bypass Filter Adapter
Dial Indicator, P/N J7872
Removed
Materials/Parts:
Oil Level Dipstick
Seal
PIN 23505025
Removed
Seal
P/N 5101160
General Safety Instructions:
Nut, Lock
Oil, Lubricating
Appendix C, Item 16
WARNING
Snap ring may snap off and
References:
could injure personnel. Use
face shield when removing or
TM 9-2320-363-20-1
installing snap ring.
REMOVAL
1.
REMOVE LOCK NUT (1), WASHER (2), SCREW (3), WASHER (4), AND CLAMP (5) FROM PIPE (6). DISCARD
LOCK NUT.
2.
LOOSEN TWO HOSE CLAMPS (7) AND REMOVE RADIATOR HOSE (8) FROM WATER PUMP (9) AND PIPE
(6). REMOVE TWO HOSE CLAMPS (7).
3.
LOOSEN TWO HOSE CLAMPS (10) AND SLIDE OIL COOLER HOSE (11) BACK FROM WATER PUMP (9).
REMOVE TWO HOSE CLAMPS (10).
4.
LOOSEN TWO HOSE CLAMPS (12) AND REMOVE WATER BYPASS HOSE (13) FROM WATER PUMP (9).
REMOVE TWO HOSE CLAMPS (12).
5.
LOOSEN TWO HOSE CLAMPS (14) AND DISCONNECT WATER FILTER HOSE (15) AND HEATER HOSE
(16). REMOVE TWO HOSE CLAMPS (14).
NOTE
Note location of elbows prior to removal to aid in installation.
6.
REMOVE TWO ELBOWS (17), ADAPTER (18), AND TWO BUSHINGS (19) FROM WATER PUMP (9).
7.
REMOVE DRAIN VALVE (20) (M915A2 AND M916A1) OR PLUG (20.1) (ALL EXCEPT M915A2 AND M916A1)
FROM WATER PUMP (9).
4-132 Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals