AIR COMPRESSOR REPLACEMENT -699580064

TM 9-2320-363-20-2

AIR COMPRESSOR REPLACEMENT

This task covers:

a. Removal

b. Cleaning/Inspection

c. Installation

INITIALSETUP

Applicable Configuration:

Equipment Condition:

All except M915A2 and M916A1

Reference

Condition Description

Tools and Special Equipment:

Page 4-141

Cooling System Drained

Shop Equipment, SC 4910-95-CL-A72

Tool Kit, SC 5180-90-CL-N26

Page 4-50

Fuel Pump Removed

Materials/Parts:

Page 4-34

Air Compressor Governor

Removed

Washer, Lock (2)

P/N MS35338-45

Gasket

P/N 5110410

General Safety Instructions:

Gasket

P/N 8929299

WARNING

Compound, Pipe

Appendix C, Item 8

Make sure all air lines and fittings are

Sealing

clear of debris. Make sure excess pipe

Grease, Automotive

Appendix C, Item 14

sealant compound does not enter air lines

and Artillery (GAA)

or fittings. Failure to do so could result in

equipment failure and/or injury to

References:

personnel.

TM 9-2320-363-20-1

Engine components are heavy. Use

extreme caution during installation of large

engine components to prevent injury to

personnel.

REMOVAL

LOOSEN HOSE CLAMP (1) AND DISCONNECT AIR INLET HOSE (2) FROM PIPE FLANGE (3).

DISCONNECT AIR SUPPLY HOSE (4) FROM ELBOW (5).

DISCONNECT OIL SUPPLY HOSE (6) FROM ELBOW (7).

LOOSEN HOSE CLAMP (8) AND DISCONNECT COOLANT OUTLET HOSE (9) FROM ELBOW (10).

LOOSEN TWO HOSE CLAMPS (11) AND REMOVE COOLANT INLET HOSE (12) FROM ELBOW (13) AND

ELBOW (14).

4-27.0 Change 3