 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
9.
INSTALL FOUR BOLTS (12) IN AIR COMPRESSOR DRIVE ASSEMBLY (10). TIGHTEN BOLTS TO 5-93 LB-FT
(101-126 N.m).
10.
INSTALL SUPPORT BRACKET (13), TWO BOLTS (14), AND TWO NEW LOCK WASHERS (15) ON AIR
COMPRESSOR (2). TIGHTEN BOLTS HAND-TIGHT.
11.
INSTALL TWO BOLTS (16) AND TIGHTEN TO 43-54 LB-FT (58-73 N.m).
12.
TIGHTEN TWO BOLTS (14) TO 13-17 LB-FT (18-23 N.m).
13.
INSTALL ELBOW (17) IN ENGINE BLOCK (18).
14.
INSTALL COOLANT INLET HOSE (19) BETWEEN ELBOW (4) AND ELBOW (17). TIGHTEN HOSE CLAMPS (20).
15.
CONNECT COOLANT OUTLET HOSE (21) TO CONNECTOR (3).
16.
CONNECT OIL SUPPLY HOSE (22) TO ELBOW (1).
17.
COAT THREADS WITH PIPE SEALING COMPOUND AND INSTALL ELBOW (23) IN AIR COMPRESSOR (2).
18.
CONNECT AIR SUPPLY HOSE (24) TO ELBOW (23).
19.
INSTALL HOSE CLAMP (25) ON AIR INLET HOSE (26). CONNECT AIR INLET H-IOSE (26) TO PIPE FLANGE
(6) AND TIGHTEN HOSE CLAMP (25).
NOTE
Follow-on Maintenance:
Install fuel pump (page 4-50).
Install air compressor governor (page 4-34).
Fill cooling system (Unit PMCS, TM 9-2320-363-20-1).
Change 3 4-27
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals